HOME > Product Categories > Tubular Running Services >
Tubular Running Services
- Hydraulic Sucker Rod Tong
- Update Time | 2022-05-21 22:54:00
-
Model XQ29/2.6 tong is an improved type of XQ29/1.8 which is used to make up and break out sucker rod thread in Well Service.
This Product Has The Following Features:
1. The structure is compact ,concise and light. Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner.
2. The operating is briefness and convenience with die. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.
3. Large low gear torque, especially suitable for the instance that is difficult to break out sucker rod thread.Model XQ29/1.8 XQ29/2.6 Pipe Size Range of Master Tong 5/8''-11/8''Sucker Rod,17/8-23/8''Tubing 5/8'' -11/8'' Sucker Rod Pipe Size Range of Backup Tong 5/8''-11/8''Sucker Rod,17/8-23/8''Tubing 5/8'' -11/8'' Sucker Rod High Gear Rated Torque 700N.m 1000N.m 516ft-lbs 737.5ft-lbs Low Gear Rated Torque 1800N.m 2600N.m 1327.6ft-lbs 1918ft-lbs High Gear Rated Speed 104r/min 98r/min Low Gear Rated Speed 40r/min 32r/min Rated Operation Pressure 10 MPa 10 MPa 1450 psi 1450 psi Max. Flow 65 L/min 80 L/min 17 gpm 21gpm Dimension :L x W x H 543 x 334 x 404 870 x 383 x 490 Weight(including Backup Tong) 105kg 100kg 231lbs 220lbs