HOME > Product Categories > Rig Components >
Rig Components
- Plunger Pumps & Mud Pumps
- Update Time | 2020-02-29 21:21:29
-
1. PG05-350 /SJ300 plunger pump widely used for cementing, fracturing and circulating operations consists of PG power end and TH, TL, TG fluid end. PG05 power end has a steel housing. 5", 4 1/2", 4" and 3 3/4"plungers are provided for different cementing requirements.TECHNICAL PARAMETERS
2. TWS600S type horizontal single-action triplex plunger pump is composed of power end, reduction gearbox and fluid end. Fluid end is forged by high-quality alloy steel. This pump has features such as high power, high pressure, small volume, light weight, etc.
Pump model PG05-350 /SJ300 TWS600S Maximum input power 350HP 600HP Maximum load of connecting rod 498KN (112050lbs) 445KN(100000 lbs) Stroke 127 mm(5") 152.4mm(6") Maximum stroke times 350rpm 450rpm Transmission ratio of reducer box gear 4.32: 1 4.61: 1 Length*width*height 69.29"×46.38"×31.7" 50.87"×53.78"×32.28" Weight:kg(lb) 2050(4520) 2155(4751)
1. The max pressure for F500, F800, F1000 pump is 34.5MPa (5000PSI). These pumps are small, light and reliable. They are the best choices for shallow well and mid-deep well drilling rigs.2. The max pressure for F1300/1600, F2200 pump is 34.5MPa (5000PSI). These pumps are the best choices for mid-deep well and deep well drilling rigs due to its large displacement and high reliability.
3. The max pump pressure for F1600HL and F2200HL pump is 51.7MPa (7500PSI), and the max displacement can reach 51.85L/S and 77.65L/S respectively. It is the best choice for deep well, super deep well, large displacements horizontal well, high pressure jetbit drilling, off-shore platform and other drilling rigs.The fluid end mainly consists of cylinders, discharge pipe, pulsation dampener, valve assembly, liners and pistons.
• Each sealing part adopts rigidity compaction, which has good high pressure tightness;
• Vertical fluid end features good suction performance;
• L fluid end features high pressure resistance, convenient for replacing the valve assembly;
• Discharge desurger, shear relief valve and discharge strainer are fitted at the discharge outlet;
• The fluid ends of F-1300 and F-1600 mud pump are interchangeable.
TECHNICAL PARAMETERS
Model F-500 F800 F1000 F1300 F1600/1600L F1600HL F2200 F2200HL Max. Liner Size × Stroke 170×191 170×229 170×254 180×305 Triplex single acting piston （6-3/4×7.5） （6-3/4×9） （6-3/4×10） （7×12） 180×305
（7×12）190×305
（7-1/2×12）230×356
（9×14）230×356
（9×14）Strokes Rating r/min 165 150 140 120 120 120 105 105 Power Rating kW（HP） 373（500) 597 (800) 746 (1000) 969 (1300) 1193 (1600) 1193 (1600) 1640 (2200) 1640 (2200) Gear Type 4.286:1 4.185:1 4.207:1 4.206:1 4.206:1 4.206:1 3.512:1 3.512:1 Discharge Outlet Flange in 4 5 5 5 5 5 5 5 Pinion Shaft Dia. mm（in） 139.7（5-1/2） 177.8（7） 196.9（7-3/4） 215.9（8-1/2） 215.9（8-1/2） 215.9（8-1/2） 254（10） 254（10） Valve Cavity API #5 API #6 API #6 API #7 API #7/
L typ API #7L type API #7 API #8 L type API #8 Approx. Weight kg（lb） 9770 (21540) 14500 (31970) 18790 (41420) 26700 (54170) 24791(27020) 29400 (64820) 38460 (84790) 44000 (94980)